Learn about the high strength of TKUltra7 aluminum alloy pre-stretched panels

TKUltra7 aluminum alloy is a material with excellent pressure processing and machining properties, especially its pre-stretched sheets. The alloy has the following characteristics:

TKUltra7 Chemical composition:

Cu: 0.15-0.4

Si: 0.4-0.8,

Fe ：0.7-,0.13

Mn0.15-0.50,

Mg: 0.8-1.2

Zn: 0.25-0.50

Cr ：0.04-0.35

Ti: 0.15

Density is 2.72g/cm3

Mechanical properties:

Tensile strength (25° CMPa)

Yield strength (25°CMPa)

Hardness 500kg force 10mm ball

Elongation 1.6mm (1/16in) thickness

< p>Note: The longitudinal mechanical properties of pipes at room temperature

Different properties in different states.

High strength: TKUltra7 aluminum alloy pre-stretched panels have high strength and are suitable for applications requiring higher mechanical properties and structural strength.

Good plasticity: TKUltra7 aluminum alloy can maintain high plasticity, giving it better processing performance in applications with complex shapes that require cold working.

Not easily deformed after processing: Due to its good plasticity and high strength, TKUltra7 aluminum alloy is not prone to deformation or stress concentration after processing, ensuring the shape stability of the product.

To sum up, the pre-stretched plate of TKUltra7 aluminum alloy has the characteristics of high strength, good plasticity and not easy to deform after processing. This makes it widely used in applications where strength and workability are required, such as in aerospace, automotive manufacturing and structural engineering.