Alumold350 aerospace aluminum alloy raw material creates high-performance molds

Alumold350 aluminum alloy has the following characteristics:

Alumold350 chemical composition:

Cu: 0.15-0.4

Si: 0.4-0.8,

Fe: 0.7-,0.13

Mn0.15-0.50,

Mg: 0.8-1.2

Zn: 0.25-0.50

Cr: 0.04-0.35

Ti: 0.15

Density is 2.72g/cm3

Mechanical properties:

Tensile Strength (25°CMPa)

Yield strength (25°CMPa)

Hardness 500kg Force 10mm ball

Elongation 1.6mm (1/16in) Thickness< /p>

Note: Longitudinal mechanical properties of pipes at room temperature

Different properties in different states.

Excellent mechanical properties: Alumold350 aluminum alloy exhibits high strength and good toughness. It maintains stable performance when subjected to external loads and stresses to meet the requirements of various industrial applications.

Excellent corrosion resistance: Alumold350 aluminum alloy has high corrosion resistance and can resist the erosion of most chemicals and corrosive environments. This makes it ideal for a wide range of applications requiring corrosion resistance.

Good thermal conductivity and electrical conductivity: Alumold350 aluminum alloy has good thermal conductivity and electrical conductivity. It conducts heat and current quickly and performs well in heating and conductive applications.

Due to these properties, Alumold350 aluminum alloy is widely used in many industrial fields. It can be used in mold manufacturing, aerospace, automobile manufacturing, electronics industry, etc. to meet the material performance requirements of different industries.