How to drill nm500 wear-resistant plate

Nm500 wear-resistant plates are generally cut using plasma cutting machines. Pay attention to the following points when cutting:

1. Select the appropriate cutting nozzle diameter according to the thickness of the plate

General Generally speaking, the larger the thickness of the plate, the larger the diameter of the cutting nozzle required (for example, a 6mm thick nm500 wear-resistant steel plate requires a cutting nozzle with a diameter of 8-10mm), and vice versa. Of course, the size of the cutting nozzle can also be adjusted appropriately according to the actual situation to adapt to the needs of plates of different thicknesses. However, it should be noted that the material must not be cut into too thin or too thick a size to avoid affecting the quality and service life of subsequent processing!

2. Pay attention to controlling the feed speed

When cutting hard materials, it is necessary to slow down the feed speed appropriately and use a larger cutting depth to improve the cutting quality and Improve work efficiency! If you encounter softer materials, you should speed up the feed speed and reduce the cutting depth appropriately to improve work efficiency!

3. Maintain good working habits

When performing cutting work, you must develop good working habits to ensure safe operation while ensuring product processing quality and service life!